Last updated and checked October 31, 2026 · By Nick Hall. Prices are the lowest new listings in our feed of 200+ retailers on October 31, 2026.
If you’ve carried a duty pistol or bought your first 9mm in the last forty years, the odds are good it was a Glock. The Austrian polymer pistol that people once dismissed as a “plastic gun” is now used by the FBI and most US police agencies. But the lineup has changed fast: the Gen 6 and V series are now what Glock sells commercially, and parts that fit your old Gen 5 may not fit a new gun. Here is who they are, what they make, and what is worth buying.
Glock Deals: 30% Off or Better
Table of Contents
Who Glock is
Glock is the Austrian maker of the polymer Safe Action pistol, founded by Gaston Glock in 1963 and based in Deutsch-Wagram, with US operations in Smyrna, Georgia. Its current commercial line centers on the Gen 6 and V series.
For its first two decades, the company made no guns. Gaston Glock made curtain rods, and in the 1970s he made knives for the Austrian military. He had no background in firearms when the Austrian Army went looking for a new service pistol in 1980, and he entered anyway. The result entered Austrian military and police service in 1982 as the P80. The name Glock 17 gets two explanations, the gun’s 17-round magazine or the company’s 17th patent, and you’ll hear both.
Gaston Glock himself proved hard to kill. In July 1999, suspecting his financial adviser Charles Ewert of embezzlement, he was attacked in a car park by a hired French mercenary swinging a rubber mallet, in an attempt staged to look like an accident. Glock was hit in the head but fought back, at nearly 70, and both men were convicted of attempted murder. He died on December 27, 2023, at 94, so the Gen 6 and V series are the first new lines of the post-founder era.
Glock sits in the value-to-mid tier and is proud of it. You aren’t paying for hand-fitting or a pretty finish. You’re paying for a gun that keeps working, and for the fact that everything in the gun store fits it.
Gen 6, V series and what it means for parts
This is the part most older Glock pages miss. Glock announced Gen 6 on December 6, 2025, with the G17, G19 and G45 in 9mm available from January 20, 2026. It has a palm swell, an extended thumb rest, an enlarged beavertail, a flat-faced trigger and three optic plates on standard models. The V series is the other half of the story, a refreshed baseline line including the G17 V, G19 V and G26 V. Gen 5 G17 and G19 pages have moved to Glock’s law enforcement section.
On the outside, Gen 5 and Gen 6 G17s share their published dimensions, so holsters and lights tend to carry over, though makers may still list each generation separately. Inside is where it breaks. The trigger housing, barrel and optic mount changed, so plenty of aftermarket drop-in kits, barrels and slides stop at Gen 5. Before you buy any internal part, look for your generation in the listing and trust the maker’s fit line over a retailer title.
California
California’s AB 1127, signed in October 2025, bans the commercial sale of Glock and Glock-style handguns from July 1, 2026. It doesn’t criminalize guns people already own. Second Amendment groups and the US Justice Department have both sued. If you live there, check where the case stands before you shop.
What Glock makes
The pistol line
The Glock 19 is probably the most recommended handgun in America, and a G19 Gen 6 was $597.60 at MidwayUSA and $620 at Brownells in our feed. The G17 Gen 6 was $595.28. The slim G43X was $448, and the G26, G34, G20 and G21 fill out the catalog. Note that several older models, such as the G29 and G30, have moved to the law enforcement catalog, so stock can be thin.
Factory magazines
If you buy one accessory, buy more factory mags. A G17 17-rounder was $24.95 at Optics Planet. Our best Glock magazines guide prices the options. Orange followers, speed loaders and mag catches are all a few dollars, and they’re in the carousel below.
Barrels, slides and small parts
OEM barrels start around $134 at Brownells. Be careful here, since many are labelled by generation, such as a G17 barrel marked Gen 1-4. Springs are about $7, a slide cover plate is under $4 and a connector about $3. These are cheap insurance on a carry gun. Glock’s own slide-lock springs, recoil springs and firing pin parts are the safe choice for anything that touches reliability.
Sights
This is the one place Glock is honestly weak. The factory polymer sights are functional and not much more, at about $4.31. Night sights cost about $83 from KYGUNCO, and dovetails haven’t changed across generations. Most serious owners replace the plastic on day one.
Pros
- Huge holster and magazine support
- Cheap factory parts
- Proven reliability
Cons
- Plastic factory sights
- Gen 6 breaks some older parts
- Banned from new California sales




















Build quality and where it is made
Glocks come from Austria and Smyrna, Georgia, and listings often say which. The hallmark is sameness, not craftsmanship. The frame is a nylon-based polymer and the steel gets a hardened nitrided finish, and every gun off the line is meant to be the same gun. Three automatic internal safeties, on the trigger, firing pin and drop, replace any manual lever, so holster discipline and trigger discipline matter on a Glock.
How Glock compares
The honest rivals are the Smith & Wesson M&P, the SIG P320 and the Walther PDP. The M&P and PDP arguably point more naturally and have better stock triggers, and the P320 is modular in a way a Glock isn’t. Where Glock wins is the ecosystem. Nobody else has decades of holsters, mags and sights built around one pattern. One caution: Gen 6 resets some of that advantage for internal parts, though not for holsters and sights.
Who should buy what
- Everyday carrier: a G19 Gen 6 and three or four factory mags.
- Deep-concealment carrier: a 43X or G26 V, with a holster made for it.
- Home-defense buyer: a G17 or G45 Gen 6 with a light and a dot.
- Competitor: a G34 with steel sights and a red dot.
- Owner of an older gun: factory springs, a firing pin and night sights.
If you want a tuned trigger out of the box or a thumb safety, look elsewhere.
The Glock philosophy
Gaston Glock was an outsider who didn’t know which rules he was supposed to respect. He used polymer where others used steel, dropped the manual safety and cut the parts count. The gun looks blocky because it was engineered, not styled, and that same idea runs through the parts: the fewest pieces that will do the job.
How to choose your Glock setup
Start with the frame size that fits your hand and how you carry. Then buy magazines until you have at least four. Replace the sights next. Keep a small kit on hand, such as springs and a connector, and learn to detail-strip the gun. If you own a Gen 6, read fit lines closely before you buy an aftermarket trigger kit, barrel or slide.
The plastic-gun myth
When the Glock 17 reached the US in the 1980s it set off a small panic about a gun that would sail through airport security. The myth contributed to the Undetectable Firearms Act of 1988, and Die Hard 2 made it famous in 1990 with a fictional porcelain “Glock 7.” It was nonsense. Most of a Glock’s weight is steel, and the polymer shows on an X-ray anyway.
What Glock owners upgrade
The first change for nearly every owner is the sights, then a better connector or trigger, an extended slide stop and a match or threaded barrel. A red dot is now just as common, on an optics-ready slide with suppressor-height sights. Baseplate extensions, grip tape and recoil springs round out the list.
Most of those upgrades come from aftermarket makers, so you won’t find all of them under the Glock name below. What you’ll find here are factory magazines, parts and sights. For aftermarket options, see our Glock guides.
Facts and Figures
- Founded: 1963, Deutsch-Wagram, Austria.
- Austrian service: 1982, as the P80.
- Gaston Glock: born 1929, died December 27, 2023.
- Gen 6 announced: December 6, 2025, on sale January 20, 2026.
- California sales ban: July 1, 2026, under AB 1127.
- Prices on October 31: G19 Gen 6 $597.60, G17 Gen 6 $595.28, G43X $448, G17 magazine $24.95.
Retail prices in the cards and carousels here are live.
Shop Glock Parts & Prices
Live Glock products and current prices, organized by department and updated automatically. Check the generation on every listing. The pistols row also shows used and trade-in guns.
Glock Pistols & Trade-Ins
Magazines & Loaders
Sights
Factory Barrels
Frame Parts & Connectors
Slides & Cover Plates
Trigger Parts
Recoil Springs
Firing Pin & Small Parts
Factory Holsters
Where Glock Fits in Our Buying Guides
- Best Glock Pistols
- The Best Glock Pistols
- Best Glocks for Concealed Carry
- Best Glock Sight Upgrades
- Best Glock Holsters
- Best Pistol Red Dot Sights
- 1911 vs Glock: Which Should You Carry?
Glock FAQ
Where are Glocks made?
In Austria and in Smyrna, Georgia. Listings often state which, such as a Glock 19 Gen 6 marked Austria.
Is the Glock 19 Gen 6 the current model?
Yes. Glock announced Gen 6 on December 6, 2025, with the G17, G19 and G45 on sale from January 20, 2026. The V series is sold alongside it.
Do Gen 5 parts fit a Gen 6 Glock?
Not always. Outside dimensions match on the G17, but the trigger housing, barrel and optic mount changed. Check the maker's fit line before buying any internal part.
What is the Glock V series?
A refreshed baseline line including the G17 V, G19 V and G26 V, announced in 2025. Glock moved its Gen 5 G17 and G19 pages to its law enforcement catalog.
Are Glocks banned in California?
New commercial sales are, from July 1, 2026, under AB 1127. The law does not criminalize guns people already own, and it is being challenged in court, so check the current status.
Do Glocks have a safety?
There is no manual lever. The Safe Action system uses three automatic internal safeties: trigger, firing pin and drop. That is why trigger and holster discipline matter so much.
Were Glocks ever undetectable plastic guns?
No. Most of a Glock's weight is steel, and the polymer shows on an X-ray. The myth helped lead to the 1988 Undetectable Firearms Act.
What tier is Glock?
Value to mid-tier: mass-produced, reliable polymer pistols, with a G19 Gen 6 at $597.60 in our feed on October 31, 2026, and the largest accessory market in handguns.
Related Firearm Manufacturers Brands
USA Gun Shop may earn a commission on purchases made through the links on this page, at no extra cost to you. We list products on merit; prices and availability are pulled live and can change.
4,164+ Gun & Ammo Deals
Updated daily from 200+ top retailers. Filter by category, caliber, action type, and price.












































































































































