- Treat every gun as loaded
- Point the muzzle in a safe direction
- Keep your finger off the trigger until you’re ready to shoot
- Know your target and what’s beyond
The right tools make the difference between a professional-quality build and a scratched-up mess. Whether you’re installing a barrel nut on an AR-15, pushing sights on a Glock, or torquing a scope mount to spec, gunsmithing tools are an investment that pays for itself the first time you avoid a trip to the gunsmith.
We compare gunsmithing tools from 200+ retailers. Browse armorer wrenches, punch sets, gun vises, sight tools, bench blocks, torque wrenches, and bench mats. Filter by brand and price.
Sniper AR-15 STOCK COMBO WRENCH TOOL Black 16cm x 4cm x 0.3cm
White Distribution #1 Medium Gunsmithing Tool, 8-Pack
-51%Sniper AR-15 STOCK COMBO WRENCH TOOL Black 19.5cm x 5cm x 0.3cm
-10%
-50%Osprey Global SKS Steel Sight Tool Black SKS Sight Tools
-20%
Grace USA 3/32in Roll Pin Punch, Durable Gunsmithing Tool
Grace USA 1/4in Brass Pin Punch, Precision Gunsmithing Tool
Grace USA 3/16" Brass Pin Punch Gunsmithing Tool
Grace USA 5/32in Brass Pin Punch, Gunsmithing Tool
Grace USA 3/32in Brass Pin Punch, 2.4mm Gunsmithing Tool
-49%-50%
-29%
Dremel 442-02 Wire Brush 2-Pak Gunsmithing Tool
-25%
-22%FAQ: Gunsmithing Tools
What tools do I need to build an AR-15?
At minimum: an armorer's wrench (for barrel nut and castle nut), a vise block or reaction rod, a set of roll pin punches and a brass hammer, a torque wrench (for barrel nut), and anti-seize grease. A bench vise is also strongly recommended. Budget $100 to $200 for a quality starter tool kit.
Do I need a sight pusher?
For dovetail sights (Glock, SIG, most handguns), a sight pusher is the safest and most effective tool. Brass punches and a hammer work but risk scratching the slide or damaging the sight. A universal sight pusher costs $40 to $80 and pays for itself after two or three sight installations.
What torque spec should I use for scope rings?
Most scope ring manufacturers specify 15 to 25 inch-pounds for ring screws and 25 to 65 inch-pounds for base screws. Always follow the manufacturer's specification. Over-torquing can crush the scope tube or strip threads. A FAT wrench (torque-limiting driver) from Wheeler costs about $35 and prevents this.
6,308+ Gun & Ammo Deals
Updated daily from 200+ top retailers. Filter by category, caliber, action type, and price.