QuietFlow AIRCHOPA 30Ti: An 8.3 oz Titanium .30 Can, $699

Last updated November 2026 · By Nick Hall, who covers hunting rifle suppressors and the NFA rules that govern them for USA Gun Shop

Quick take: QuietFlow, a new suppressor brand from GForce Arms, has a .30 cal hunting can called the AIRCHOPA 30Ti. It is 3D-printed titanium, weighs 8.3 ounces and lists at $699.

• What it is: A 6.65-inch, 8.3-ounce titanium suppressor with eight baffles, rated for .223 Rem / 5.56 NATO through 300 PRC.
• Price: QuietFlow lists the AIRCHOPA 30Ti at an MSRP of $699.
• Where: Through licensed SOT dealers, and QuietFlow’s product page shows it in stock with a dealer locator.
• Why it matters: At 8.3 ounces it weighs about half what the Banish HD 762 INC does, and it is built for bolt guns that get carried more than shot.

Most .30 cal cans try to do everything, so they end up heavy enough to survive an AR-10 mag dump. This one does not try. We pulled the spec sheet straight from QuietFlow so you don’t have to, and the fine print is where the story is.

Table of Contents

What’s Inside the QuietFlow AIRCHOPA 30Ti

QuietFlow introduced the AIRCHOPA 30Ti on November 6, 2026, two days after it launched quietflow.com with the AIRCHOPA in its starting lineup. The AIRCHOPA 30Ti product page calls it a “3D-printed titanium .30 cal suppressor” that is “ready for HUB or direct thread out of the box.”

The numbers: 6.65 inches long, 8.3 ounces and eight baffles, with what QuietFlow calls patent-pending Zero Flow baffle tip geometry. The finish is Cerakote C-Series Tungsten Gray, and the SKU is QFAC30TI.

Mounting comes in the box. The rear takes a 1.375×24 HUB (Bravo) mount, and a 5/8-24 direct-thread hub is included. QuietFlow rates it for cartridges from .223 Rem / 5.56 NATO through 300 PRC.

QuietFlow’s sound figures are on a .308 Winchester: 38.0 dB of reduction at the muzzle and 34.6 dB at the shooter’s ear. It says those were measured with a Larson Davis Spartan Model 821.

Bolt Guns Only, and the 15 Rounds a Minute Rule

Here is the fine print. The product page says that because of the lightweight internal lattice inside, “use is limited to firing schedules of fewer than 15 rounds per minute, particularly with magnum cartridges.”

QuietFlow’s launch announcement goes further and says the AIRCHOPA 30Ti is designed for “bolt-action, single-shot and other non-gas-operated rifles.” It is not a flow-through design and uses no extra venting.

That is a hunting can, plain and simple, and the trade it makes is easy to understand if you think about how a deer rifle gets used, which is a long walk with the rifle on your shoulder, one or two shots at an animal, and maybe a box of ammo at the bench before the season.

So leave it off the AR-10 and the 3-gun rifle. If you are still picking the rifle to put it on, our list of the best deer hunting rifles is where I would start.

Where $699 and 8.3 Ounces Land Against Other .30 Cal Cans

Two other .30 cal cans we covered recently make a useful yardstick. The San Tan 1836 Frontier lists at $599 and weighs 13.3 ounces. The Banish HD 762 INC lists at $1,129 and weighs 15.9 ounces, but it is rated for full-auto fire on gas guns.

The AIRCHOPA 30Ti is $100 more than the San Tan and 5 ounces lighter. Against the Banish, it saves you $430 and about half the weight, and gives up any business on a gas gun to get there.

One caution on the decibel numbers. Every maker tests its own way, on its own rifle, with its own meter placement, so treat QuietFlow’s 34.6 dB at the ear as a QuietFlow number and not a head-to-head result.

Who Is QuietFlow? GForce Arms’ New Suppressor Brand

QuietFlow is a stand-alone suppressor brand from GForce Arms, and every can is made by GForce Arms, Inc. in Reno, Nevada. The AIRCHOPA 30Ti is one of four cans in the starting lineup.

The rest of that lineup is the Engine No. 9, a stainless can for pistol caliber carbines and centerfire rifles, plus two rimfire cans, the Throttle 22Ti and the 22-Whistler. QuietFlow says every can carries a lifetime warranty, and its AIRCHOPA announcement adds a 30-day money-back guarantee.

The NFA Paperwork Is Lighter Than QuietFlow’s Page Says

QuietFlow’s page still describes the old route: the can ships to your dealer, the dealer submits an ATF Form 4, and you take it home once it is approved. The page also notes that the federal tax on suppressors is $0 as of January 1, 2026, which matches 26 U.S.C. § 5811.

But the approval step changed on October 9, 2026. ATF said that day it “will no longer require individuals to seek ATF approval under the NFA” before making or transferring silencers, and it will still accept Form 4 applications on a voluntary basis. Our report on ATF’s NFA guidance has the details.

ATF calls this a change in enforcement policy, not a repeal, and it does “not affect state or local laws that govern NFA weapons.” A suppressor is still a firearm under the Gun Control Act, so the dealer still runs your background check. Check suppressor laws by state before you order.

When You Can Buy the AIRCHOPA 30Ti

QuietFlow says the AIRCHOPA 30Ti is available now through licensed SOT dealers at an MSRP of $699, and its product page shows the can in stock. It ships to a dealer, not to your door.

Under half a pound. Titanium. Built for one job, and that is the whole pitch.

---

Frequently Asked Questions

---

Related Reading

• Best Suppressors in 2026: Top Silencers for Every Caliber (Now $0 Tax)
• San Tan 1836 Frontier .30 Cal Suppressor: 13.3 oz, $599
• Daniel Defense Goes 3D-Printed With MUTE30Ti and NULL9Ti
• The $0 Suppressor Tax Stamp: What Changed in 2026 (and What Didn’t)
• How to Buy a Suppressor in 2026: The Complete Guide
• How Do Suppressors Work? The Science Behind Silencers