Affiliate disclosure: This Christensen Arms MPR review contains affiliate links. If you buy through our links then we can receive a small commission that helps keep the lights on. You don’t pay anything more.
Last updated and checked October 30, 2026 · By Nick Hall. Prices are the lowest new listings in our feed of 200+ retailers on October 30, 2026.
- Treat every gun as loaded
- Point the muzzle in a safe direction
- Keep your finger off the trigger until you’re ready to shoot
- Know your target and what’s beyond
Table of Contents
How we tested: Every pick here is ranked against our testing methodology. Minimum round counts, accuracy and reliability protocols, the failures that disqualify a gun.
Review: Christensen Arms MPR 6.5 Creedmoor – Carbon Fiber Precision Goes Mainstream
Our Rating: 8.5/10
- MSRP: $2,299.99 (22-inch 6.5 Creedmoor)
- Street Price: From $1,856.31 for the 22-inch 6.5 Creedmoor on October 30, 2026 (Use our live pricing for the best up to date deal)
- Caliber: 6.5 Creedmoor
- Action: Push-feed bolt action, 2-lug
- Barrel Length: 22″
- Barrel Type: Carbon fiber wrapped, stainless steel core, button rifled, hand lapped
- Twist Rate: 1:8″
- Overall Length: 36.75″ (stock extended), 28″ (stock folded)
- Weight (unloaded): 6.9 to 7.5 lbs in the 22-inch 6.5 Creedmoor, depending on configuration
- Capacity: 4+1 or 5+1 depending on the SKU (one AICS-pattern detachable magazine included)
- Chassis: 7075-T6 billet aluminum, skeletonized
- Trigger: TriggerTech flat shoe, adjustable, set around 3 lbs at the factory
- Safety: 2-position
- Stock: Side-folding with Magnelock, adjustable LOP (12.5″-14.5″)
- Barrel Threading: 5/8-24 TPI with match brake
- Made in: USA (Gunnison, Utah)
Pros
- Carbon fiber barrel saves serious weight without sacrificing accuracy
- Sub-MOA guarantee backed by the manufacturer
- Folding stock makes it stupid portable for a precision rifle
Cons
- QC has been inconsistent on carbon barrel models historically
- Street price near $1,850 meets tough rivals
- Carbon barrel can string shots as it heats up if you push it






Quick Take
The Christensen Arms MPR tries to answer a question that precision rifle shooters have been asking for a decade: can you get a sub-7-pound bolt gun that shoots half MOA and doesn’t cost as much as a used truck? With the 22-inch 6.5 Creedmoor listed from $1,856.31 on October 30, 2026, and a carbon fiber wrapped barrel that brings the weight down to under 7 pounds, the answer is a cautious yes.
After 500 rounds, I’ll say this: when the MPR is on, it’s really on. Our best groups were genuinely impressive, and the combination of light weight, folding stock, and match accuracy makes it one of the most versatile precision platforms you can buy without getting into custom territory. The carbon fiber barrel shaved almost a full pound compared to a steel-barreled equivalent, and that matters when you’re humping a rifle up a mountain or schlepping it across a flat range all day.
But I’d be lying if I told you Christensen’s reputation for QC doesn’t give me pause. Forum threads about barrel issues and warranty returns are easy to find. Our test rifle was excellent, and I’ll review what I actually shot. Just know that owner experiences vary more than they should at this price point.
Best For: Serious precision shooters who want a lightweight, portable bolt gun with match accuracy and don’t mind paying a premium for carbon fiber weight savings. Ideal for backcountry hunters and PRS guys who need to move fast. Grab a quality rifle scope that matches the rifle’s capabilities and you’ve got a seriously capable long-range setup.
Why Christensen Arms Built the MPR This Way

Christensen Arms has been the carbon fiber company in the firearms world since 1995. They were wrapping barrels in carbon fiber when most rifle manufacturers thought the material was strictly for race cars and fishing rods. Their whole identity is built around weight reduction without performance compromise, and the MPR is the purest expression of that philosophy in a chassis rifle format.
Problem Christensen set out to solve is real. Traditional precision rifles are heavy. A Remington 700 in a decent chassis can run past 10 pounds before you add glass. That’s fine if you’re shooting from a bench all day, but try carrying that up a mountain or across a 3-gun stage. The MPR takes a precision action, wraps the barrel in carbon fiber to shed weight, hangs it in a skeletonized billet aluminum chassis, and adds a folding stock that makes it pack down smaller than your average AR-15.
Result is a sub-7-pound precision rifle with a match chamber and a sub-MOA guarantee. On paper, that’s an incredible package. And Christensen backs it up: if your MPR doesn’t shoot sub-MOA with match factory ammo, they’ll take it back, fix it, and send it home. That guarantee matters more than you’d think, and I’ll get into why in the known issues section. Christensen’s BA Tactical carries the same sub-MOA guarantee in a fixed tactical stock.
Building this rifle in Gunnison, Utah also means Christensen controls the entire manufacturing process. They’re not farming out barrels to one supplier and actions to another. The carbon wrapping, the hand lapping, the chambering, the assembly: it all happens under one roof. When quality control is on point, the results speak for themselves. When it’s not… well, forums have plenty to say about that too.
MPR Variants Worth Considering
Christensen builds the MPR platform in several factory chamberings and barrel-length combinations. Here is how the family breaks down for buyers actually shopping the precision-rifle segment.

The all-rounder and the chambering this review covers (we shot the 22-inch). Carbon-wrapped barrel in four lengths, sub-MOA accuracy guarantee, factory TriggerTech flat-shoe trigger, AICS magazine, threaded muzzle. Best For: Long-range steel, occasional hunting, PRS gateway shooters who want one rifle to do everything from 100 to 1,000 yards.
The .308 build for buyers who want cheap, easy-to-find match ammo. Identical chassis, identical trigger, identical magazine system, same sub-MOA guarantee. The 16 and 20-inch barrels handle better off a tripod or in a vehicle but give up some velocity on long shots. Best For: Sub-600-yard work, vehicle-borne shooters, training-heavy users who want cheap factory match ammo.
The dedicated mile-and-beyond build. Long action, 26-inch barrel, optimized for the higher-recoil .300 PRC magnum cartridge. Heavier than the 6.5 Creedmoor but the only MPR variant that genuinely reaches transonic past 1,500 yards. Best For: ELR competition, big-game hunters who want one rifle for everything from elk to 1-mile steel, anyone already invested in .300 PRC brass.
The PRS-favorite chambering. Same MPR chassis, lighter-recoiling 6mm bore for fast follow-up shots and reduced fatigue across a 10-stage match day. Barrel life runs shorter than 6.5 Creedmoor, but the recoil reduction is significant. Best For: Competitive PRS / NRL Hunter shooters, recoil-sensitive shooters who want a precision platform.
Competitor Comparison
Tikka T3x TAC A1 (from $2,319)
Tikka TAC A1 is the MPR’s most direct competitor, and it’s a brutal matchup. The Tikka gives you that legendary Sako-built action smoothness, a modular aluminum chassis with adjustable everything, and accuracy that’s routinely sub-MOA. It weighs over 10 pounds though, roughly 3 pounds more than the MPR. The 6.5 Creedmoor right-hand rifle was $2,319 on October 30, 2026, about $460 more too.
If weight doesn’t matter to you, the TAC A1 might be the smarter buy. Tikka’s QC consistency is better than Christensen’s track record, and the action is arguably the smoothest thing in this price range. But if you’re carrying this rifle any significant distance, the MPR’s weight advantage is enormous. Pick your priority.

Bergara Premier HMR Pro ($1,549.99-$1,699.99)
Bergara has been eating everyone’s lunch in the mid-tier precision market, and the Premier HMR Pro is their flagship. It’s heavier than the MPR at over 9 pounds, runs a steel barrel, and sits in a mini-chassis stock that’s genuinely comfortable. Accuracy is comparable. The Bergara Performance Trigger is excellent.
Here’s the honest comparison: the Bergara is the safer buy. Their QC is more consistent, owners have fewer complaints, and it was $1,699.99 at Palmetto State Armory on October 30, 2026, about $150 less. The MPR wins on weight and portability. If I was buying a rifle to sit on a bench and punch tiny groups, I’d probably lean Bergara. If I needed to carry it 10 miles into the backcountry and then shoot sub-MOA from a pack, the MPR gets the nod.




Seekins Precision Havak PH3 ($1,664.99-$1,849.99)
The Seekins is the other American answer to “light and accurate.” The Havak action is smoother than the Christensen, and Seekins’ reputation for QC is about as clean as it gets in this price band. The PH3 is a hunting rifle rather than a chassis gun, with a carbon fiber stock instead of aluminum, and it was $1,664.99 to $1,849.99 on October 30, 2026 depending on chambering.
For about the same money as the MPR, the Seekins has the nicer action. But it doesn’t fold, it has no M-LOK forend or adjustable chassis, and it doesn’t disappear into a pack. The MPR carves out its own niche by being genuinely light and genuinely portable in a way that these heavier precision platforms simply aren’t.



Accuracy International AT-X (from $6,865)
Including the AI feels almost unfair. The carbon-barreled AT-XC was $6,865 on October 30, 2026, against a rifle at about a quarter of the price. But it’s worth mentioning because the AT-X also folds, also runs AICS mags, and is the gold standard for folding precision rifles. The build quality, the action, the trigger: everything is a tier above.
If money is no object, the AI is the better rifle. Period. But the MPR gives you most of the capability at about 27% of the cost, with a lighter overall package thanks to the carbon barrel. For most shooters, that math works out heavily in Christensen’s favor.
Features and Technical Deep Dive
The Carbon Fiber Barrel

This is the headline feature, so let’s address it properly. The MPR’s barrel starts as a stainless steel core that’s button rifled and hand lapped. Christensen then wraps it in their proprietary carbon fiber, which adds rigidity while dramatically reducing weight. The finished product weighs roughly a pound less than an equivalent-profile steel barrel.
Does carbon fiber change how the barrel performs? In terms of pure accuracy, no. The bullet still travels down a steel bore. What the carbon wrap does is change how the barrel handles heat. Carbon fiber dissipates heat faster than bare steel in some conditions, but the insulating effect can also trap heat against the steel core during sustained fire. In practice, I noticed the barrel stayed cooler to the touch during slow-fire precision strings but warmed up noticeably during rapid fire drills.
The real benefit is weight. Period. A sub-7-pound precision rifle with a 22-inch barrel is only possible because of that carbon wrap. If weight doesn’t matter to you, save the money and buy a steel-barreled alternative. If it does matter, this is how you get there without going to a short barrel.
Folding Stock and Chassis
7075-T6 billet aluminum chassis is the backbone of the MPR, and it’s well-executed. The skeletonized design shaves ounces without compromising rigidity. M-LOK slots run along the forend for accessories, and the whole thing is Cerakoted in either black, desert brown, or tungsten depending on the model.
Side-folding stock uses Christensen’s Magnelock technology, which holds the stock securely in both the folded and extended positions via strategically placed magnets. When extended, there’s zero play or wobble. It locks up tight enough that you’d never know it folds. When folded, the overall length drops from 36.75 inches to just 28 inches. That’s AR-pistol territory for a full-length precision rifle.
Length of pull adjusts from 12.5 to 14.5 inches, and there’s an adjustable cheek riser. Getting a proper cheek weld behind any scope from a low-profile LPVO to a high-mount 5-25x was straightforward. The adjustments are tool-free and hold their position solidly.
Trigger
The MPR ships with a TriggerTech flat-shoe trigger, and it’s good. It breaks cleanly with minimal creep, and the flat shoe gives a consistent pull regardless of finger placement. Christensen sets it around 3 pounds at the factory, and ours measured close to that.
It’s adjustable, so you can take weight off if 3 pounds feels heavy for prone work. I left ours alone, and it suits precision shooting fine. I never felt like the trigger was holding back the rifle’s accuracy potential.
Action and Bolt
Christensen machines their own action in-house, and the bolt runs smooth. It’s not Tikka-smooth, but what is? The two-lug bolt cycles quickly and positively. Primary extraction is strong enough to handle even sticky cases, and the ejector throws brass clear with authority.
The action mates to an integrated Picatinny rail on the receiver, which is nice because it means you’re not dealing with a separate rail that might introduce alignment issues. The rail is machined as part of the receiver, so it’s guaranteed to be straight and square to the bore.
At the Range: 500 Round Test Protocol
Break-In
Standard protocol: shoot one, clean, repeat for the first 10. Then five-round groups with cleaning every 15 rounds through round 50. The MPR settled in quickly. By round 20, groups were already tightening up, and by round 50 the barrel was giving consistent point-of-impact and group sizes. Christensen’s hand-lapping process probably contributes to the short break-in.
Ammo Log
- Hornady ELD Match 140gr: 150 rounds – Excellent performer, averaged .58 MOA
- Federal Gold Medal 130gr Berger: 120 rounds – Slightly tighter.55 MOA average
- Prime 130gr OTM: 80 rounds – Best performer.46 MOA average (best 5-shot: .38″)
- Hornady Precision Hunter 143gr ELD-X: 80 rounds – Hunting load test.78 MOA average
- Nosler Match Grade 140gr: 70 rounds – Consistent.65 MOA average
Reliability Testing
Five hundred rounds with zero failures of any kind. Bolt cycled cleanly from the first round to the last. The AICS magazines fed every round without hesitation, and I tested with both the included Christensen magazine and aftermarket Magpul PMAGs. Both worked perfectly.
I deliberately tested the folding stock latch for reliability too. Deployed it, folded it, deployed it again between strings. Every single time it locked up tight with zero play. The Magnelock system works exactly as advertised. No concerns there whatsoever.
Accuracy Results
Across 500 rounds and five different factory loads, the MPR averaged .62 MOA at 100 yards. The best five-shot group was a stunning .38 inches with Prime 130gr OTM. That’s not a cherry-picked fluke either: Prime consistently delivered the tightest groups, with Federal Gold Medal right behind it.
Where things get interesting is sustained fire accuracy. I ran a 10-round string as fast as I could cycle the bolt (roughly one round every 4 seconds), and the group opened up to about 1.2 MOA by the end. The barrel was noticeably warm. Let it cool for 5 minutes and the next group went right back to .6 MOA. This is the carbon barrel heat behavior I mentioned earlier. For slow, deliberate precision shooting, it’s a non-issue. For PRS-style rapid fire strings, keep it in mind.
At 600 yards, I was holding .75 MOA on a calm day with Hornady ELD Match. Pushed it to 1,000 and connected with a 2 MOA steel target 7 out of 10 shots, with the misses attributable to my wind reading more than the rifle. This thing reaches out.
Performance Testing Results
Reliability: 9/10
Zero malfunctions in 500 rounds. The action cycled perfectly, magazines fed without issue, and the folding mechanism worked flawlessly every time. I’m docking one point because the broader owner community has reported occasional QC issues that make me hesitant to give a perfect score to the platform as a whole, even though our specific rifle was bulletproof.
Accuracy: 9/10
A .62 MOA average with factory ammo across 500 rounds is outstanding. The sub-MOA guarantee isn’t just marketing talk with this rifle, it’s the baseline. The only knock is the shot-stringing tendency during sustained rapid fire as the barrel heats up. For a hunting or deliberate precision rifle, this is a non-factor. For competition use, it’s worth knowing about.
Ergonomics and Recoil: 8/10
Adjustable chassis is comfortable and customizable. LOP adjustment, cheek riser, and the overall balance of the rifle are all dialed. At under 7 pounds, the MPR is light enough to carry all day and still steady enough to shoot from prone or a bipod. Recoil with the included brake is laughably mild for 6.5 Creedmoor. You can spot your impacts without effort. The ergonomic penalty for the light weight is slightly more felt recoil when shooting brakeless, but who shoots brakeless?
Fit, Finish, and QC: 9/10
Our specific rifle was beautifully finished. The Cerakote was flawless, the carbon wrap was cosmetically perfect, the machining on the chassis showed zero tool marks. The action-to-chassis fit was tight, the barrel extension was properly torqued, and everything felt like it was built by people who gave a damn. I’m scoring what I tested, and what I tested was excellent. The broader QC discussion gets its own section below.
The QC Question and the Sub-MOA Guarantee
Christensen rifles have a split reputation. Plenty shoot well from the box, and some go back to Gunnison before they do. Our rifle was one of the good ones, and that’s all I can personally vouch for.
The safety net is the guarantee. Christensen Arms guarantees every one of its bolt-action rifles, the MPR included, to shoot sub-MOA with good ammunition and proper barrel break-in. If yours doesn’t, the company handles it as a warranty claim.
Before you call that warranty line, do the boring stuff. Torque the action screws and scope rings to spec, break the barrel in, and shoot it with a proven match load like Federal Gold Medal or Hornady ELD Match from a solid rest. Half the “inaccurate rifle” complaints you read about any brand come down to a loose ring or cheap ammo.
Good news: Christensen’s customer service gets consistently positive reviews. If your rifle doesn’t perform, they’ll send a prepaid label and make it right. That’s a meaningful safety net. But nobody wants to buy an $1,850 rifle and immediately ship it back. The QC lottery shouldn’t be a thing at this price.
Known Issues and Common Problems
Carbon Barrel Quality Control
This is the big one. Christensen’s carbon fiber wrapped barrels have a checkered reputation in the enthusiast community. Some shoot lights-out from day one. Others arrive with accuracy issues that require warranty service. Every MPR ships with the carbon-wrapped barrel, so there’s no steel-barrel version to hide behind. If consistency matters more to you than weight savings, a steel-barreled Bergara or Tikka is the cleaner answer.
Heat-Induced Shot Stringing
Carbon fiber wrapped barrels can behave differently than steel barrels as they heat up. I noticed our test rifle opened groups noticeably after 8-10 rapid shots. The groups didn’t just grow evenly; they strung vertically. Let the barrel cool for a few minutes and accuracy returned to normal. For hunters taking 1-3 shots on game, this is completely irrelevant. For PRS competitors running 10-round stages under time pressure, it’s a legitimate consideration.
Price-to-Competition Ratio
At $1,825 to $2,100 across chamberings on October 30, 2026, the MPR lives in dangerous territory. The Bergara Premier HMR Pro ($1,549.99 to $1,699.99) shoots just as well with more consistent QC. The Tikka T3x TAC A1 ($2,319) gives you a legendary action with Finnish build quality. The Howa 1500 HCR chassis rifle ($1,480.99 at Palmetto State Armory) gets you most of the accuracy for about $375 less. The MPR’s unique selling proposition is weight, and if that’s not your top priority, the competition has compelling arguments.
Who Should NOT Buy the Christensen MPR
This rifle is excellent but it is not for everyone. Here is who should walk away.
- Recoil-sensitive new precision shooters. The MPR weighs about 7 pounds in 6.5 Creedmoor, and a light rifle kicks harder than a heavy one, brake or no brake. The chassis is unforgiving and the trigger reach is sized for a fully-built adult shooter. New shooters get more out of a heavier Howa 1500 or a Bergara HMR instead.
- Buyers shopping under $1,800. The 6.5 Creedmoor MPR started at $1,856.31 on October 30, 2026. If your budget is tight, the Bergara Premier HMR Pro (from $1,549.99) shoots just as well for less money. Hand-built American precision costs more for real reasons, but if you cannot stretch the budget, the Bergara is the smarter buy.
- Anyone who refuses to torque scope rings or learn basic gunsmithing. Christensen QC on the carbon-wrapped barrels has a mixed reputation, and the sub-MOA guarantee is a repair promise, not a promise you’ll never need it. If you cannot send a rifle back and live without it for a few weeks, look at a Bergara Premier HMR Pro where the QC variance is tighter.
- PRS shooters who want a heavy, flat-shooting match gun. Light weight is the MPR’s whole point, and on a 10-round timed stage a light rifle moves more and the carbon barrel strings as it heats. If you never carry the rifle farther than the truck to the line, a heavier Tikka T3x TAC A1 or Bergara Premier HMR Pro will feel steadier.
- Hunters who need to carry the rifle long distances on foot. At about 7 pounds bare and well over 8 with a scope, the MPR is a chassis gun, not a mountain rifle. If you’re humping a rifle into the high country, look at the Christensen Ridgeline FFT or Mesa FFT instead, same Christensen build quality, lighter still, with the carbon fiber stock instead of an aluminum chassis.
Parts, Accessories, and Upgrades
| Upgrade Category | Recommended Component | Why It Matters | Cost Estimate |
|---|---|---|---|
| Scope | Vortex Razor HD Gen III 6-36×56 | High-end glass that matches the MPR’s precision potential | $1,800-$2,000 |
| Bipod | Atlas BT46-LW17 PSR or Ckye-Pod | Lightweight bipod that doesn’t negate the carbon barrel weight savings | $250-$450 |
| Trigger | Adjust the factory TriggerTech | It ships around 3 lbs and adjusts lighter, no new trigger needed | $0 |
| Muzzle Device | Area 419 Hellfire or Dead Air Sandman-S | Suppress or brake for even less recoil | $120-$900 |
| Magazines | Magpul PMAG 5 AICS or MDT Metal AICS | Extra mags for competition or range days | $35-$55 each |
| Rear Bag | Armageddon Gear Waxed Canvas | Supports the lightweight stock for more stable prone shooting | $45-$65 |
For optics and accessories, check EuroOptic for premium glass and Brownells for everything else. MidwayUSA and Palmetto State Armory are solid alternatives for bipods, bags, and AICS magazines.
The Verdict
Christensen Arms MPR in 6.5 Creedmoor is a genuinely impressive rifle when it’s built right. Sub-7 pounds, folding stock, match chamber, sub-MOA accuracy, and a carbon fiber barrel that actually delivers meaningful weight savings. Our test rifle was excellent across 500 rounds, and the accuracy numbers speak for themselves. There’s nothing else on the market that combines this level of precision with this little weight at this price point.
The asterisk is quality control. Christensen’s reputation for inconsistency is earned, not invented by internet trolls. When you buy an MPR, you’re betting that you’ll get one of the good ones. Most people do. But “most” isn’t “all,” and at $1,850 or more you shouldn’t have to play the lottery. Christensen’s sub-MOA guarantee and solid warranty service provide a safety net, but the ideal scenario is a rifle that never needs warranty work in the first place.
If lightweight precision is your top priority and you’re willing to deal with a potential warranty return, the MPR is a fantastic rifle. If you want absolute peace of mind, the Bergara Premier or Tikka TAC A1 are safer bets at similar money. Either way, this is a serious precision platform that earns its place in the conversation.
Final Score: 8.5/10
Best For: Backcountry hunters and weight-conscious precision shooters who need a sub-7-pound rifle that folds down for transport and still prints half-MOA groups at distance. Pair it with a premium lightweight rifle scope and you’ve got one of the most portable precision setups money can buy.







FAQ: Christensen Arms MPR
Frequently Asked Questions
What is the Christensen Arms MPR rifle?
The Christensen Arms Modern Precision Rifle (MPR) is a bolt-action precision rifle built in a full-length aluminum chassis with a side-folding, adjustable stock, an M-LOK forend, an AICS-pattern detachable magazine and a carbon fiber wrapped 416R stainless barrel. It comes in 6.5 Creedmoor, .308 Win, 6mm Creedmoor, 6.5 PRC and .300 PRC, among others, with a factory sub-MOA guarantee. The 22-inch 6.5 Creedmoor lists at $2,299.99.
Is the Christensen MPR accurate?
Yes. Over 500 rounds in our 6.5 Creedmoor test, five-shot groups at 100 yards averaged .62 MOA across five factory loads, and the best group was .38 inches with Prime 130gr OTM. The carbon-wrapped barrel strung shots vertically on fast 10-round strings, opening to about 1.2 MOA, then came right back after five minutes of cooling.
How much does the Christensen MPR cost?
On October 30, 2026 the 22-inch 6.5 Creedmoor MPR was listed from $1,856.31, with .308 and 6mm Creedmoor models from $1,825.45 and the 26-inch .300 PRC from $1,880.79. MSRP on the 22-inch 6.5 Creedmoor is $2,299.99. Check the live pricing cards on this page for today's numbers.
How does the MPR compare to a Tikka T3x TAC A1?
The Tikka T3x TAC A1 in 6.5 Creedmoor was $2,319 on October 30, 2026, about $460 more than the MPR, and it weighs over 10 pounds against the MPR's roughly 7. The Tikka has the smoother action and more consistent QC. The MPR wins on weight, the folding stock and price. Buy the Tikka for a range or match gun, the MPR if you carry it.
Are Christensen Arms carbon fiber barrels durable?
Yes. The bore is still a 416R stainless steel core; the carbon wrap adds stiffness and cuts weight, so barrel life tracks the cartridge like any stainless barrel. The trade-off we saw is heat: the wrap holds heat against the core during fast strings, which caused vertical stringing after 8 to 10 rapid shots. Slow, deliberate fire was not affected.
Does the Christensen MPR have a sub-MOA guarantee?
Yes. Christensen Arms guarantees all of its bolt-action rifles, including the MPR, to shoot sub-MOA with quality ammunition and proper barrel break-in. If yours doesn't, it is handled as a warranty claim. Before you send one back, torque the action screws and rings and test with a proven match load.
What scope works best on the Christensen MPR?
For the 6.5 Creedmoor MPR, a first-focal-plane 5-25x or 6-24x with a mil reticle matches the rifle. Glass like the Vortex Strike Eagle 5-25x56 or the Athlon Ares ETR keeps the package affordable, and a Vortex Razor HD Gen III is the premium step. Keep scope weight in mind, since a light rifle loses its edge under a heavy optic.
Does the MPR come with a magazine?
Yes. The MPR ships with one AICS-pattern detachable magazine, a 4-rounder or 5-rounder depending on the SKU. The rifle takes any AICS-pattern magazine, so Magpul PMAG AICS and MDT metal magazines work, and spares cost roughly $35 to $55.
Is the MPR good for hunting?
It can hunt, but it is a chassis rifle first. At about 7 pounds bare it is light for a precision rifle, and the folding stock makes it easy to pack or keep in a truck, but a scoped MPR still runs well over 8 pounds. For long walks in the mountains, the Christensen Ridgeline or Mesa with a carbon fiber stock is the better hunting rifle.
Where is the Christensen MPR made?
The MPR is built by Christensen Arms in Gunnison, Utah, where the company does its carbon fiber barrel wrapping, chassis machining and assembly. The trigger is a TriggerTech flat-shoe unit, set around 3 pounds at the factory.
3,213+ Gun & Ammo Deals
Updated daily from 200+ top retailers. Filter by category, caliber, action type, and price.
Related Guides


